Your home’s hot water needs to travel from the tank to various locations throughout your house. In my case; I have copper pipes, but this is also applicable to Pex or PVC piping.
During the traveling process, heat moves from the inside of your hot water pipe to the surrounding area. To give you a rough estimate — my home costs about $18.67 per month for hot water. I have a standard gas hot water tank. Electric tanks are generally more expensive to operate and therefore your pipe insulation savings will be higher depending on how you generate hot water. Any heat that is transferred through the pipe is literally wasted before it ever reaches your sinks or showers. For this reason we want to stop the waste, save some energy, and make a more efficient domestic hot water system.
1. Heat is wasted while traveling from the hot water tank to the faucet/shower.
2. Insulating the pipes can stop this waste and allow your home to be more efficient and cost less money!
3. Pipe insulation costs roughly $2 per 6 ft section at the local hardware store.
4. Installation time is roughly 1 hour to complete the project.
5. You should save $3-$8 per month by adding insulation and your payback will be 1-3 years.
So, we begin this project in my basement. We need to find all the water pipes that are supplying hot water to various locations in the home. For me I have a dishwasher, washing machine, basement faucet, kitchen faucet, bathroom faucets x2, and a single shower. Turn on the hot water at the furthest location and allow it to run for 1 minute. This will heat the pipes up throughout your home and allow you to find the correct ones requiring insulation.
Now, travel into your basement and begin touching the hot water pipes (careful they might be hot). Mark the pipes that are warm and note there locations so we can add insulation to the correct pipes.
There will be three types of pipe insulation at the hardware store. Foam, foam self sealing, and rubber. For our purposes, I find the foam self sealing option to be best. The standard foam is roughly $.80 cheaper but you would need to add tape which lengthens installation time AND costs extra for the tape. Just buy the self sealing foam pipe insulation which cost $1.77 for me per 6 ft section at 1/2″ in size. Most of your pipes will be 1/2″ but make sure to check the various pipe sizes before making the hardware store trip.
Here is a picture of my basement hot water supply piping. These are 1/2″ in size and they are now warm to the touch. One of these pipes is for cold water…and doesn’t need to be insulated. Make sure to feel the pipes and find which ones actually require the insulation!
To be continued…